User Manual Q&AAnswer
Mar 08, 2025 - 06:40 AM
To connect the FERVE PRIMA F-705 Battery Charger to your vehicle's battery, please follow these steps:
1. Read the instruction manual thoroughly before using the charger to ensure proper usage and safety precautions.
2. Ensure that there are no flames or sparks in the vicinity of the charger.
3. Before connecting or disconnecting the clamps, always disconnect the mains cable (1) from the charger.
4. Place the charger in a well-ventilated area to avoid any potential buildup of explosive gas.
5. Do not expose the equipment to rain or any other moisture.
6. If the wire to the mains needs replacement, it should be done by a specialized workshop.
Now, to connect the charger to your vehicle's battery:
1. Identify the positive (+) and negative (-) terminals on your vehicle's battery.
2. Connect the red clamp of the charger to the positive (+) terminal of the battery.
3. Connect the black clamp of the charger to the negative (-) terminal of the battery.
4. Ensure that the clamps are securely attached to the battery terminals.
5. Once the clamps are properly connected, you can plug in the mains cable (1) to a suitable power source.
6. Follow the charging instructions provided in the manual to select the appropriate charging mode and settings for your battery.
Please note that it is essential to follow the instructions and safety precautions mentioned in the manual to ensure safe and effective charging of your vehicle's battery.
Add New Comment