User Manual Q&AAnswer
Mar 08, 2025 - 06:26 AM
To attach the Blue Sky Network Skylink Battery Pack to the Skylink Data Gateway, follow these steps:
1. Bolt the Skylink Battery Pack to the Skylink Data Gateway. You can mount it to a post using the Data Gateway mounting bracket or xxxx it to a wall.
2. Connect the interconnect cable between the Battery Pack and the Data Gateway. There are different options for the interconnect cable:
- Standard 6” interconnect cable, PN 300697-1
- Optional 72” interconnect cable, PN 300697-2
- Optional 6” interconnect cable & Ethernet cable, PN 300697E-1
The interconnect cable should be connected to the left-hand connector of both the Data Gateway and the Battery Pack when looking at the front of both units.
3. Connect the power input cable to the right-hand connector on the Battery Pack. For mobile use, this is a temporary connection to charge the battery, while for fixed installations, it is a permanent connection. There are different options for the power input cable:
- Standard power input cable, PN 300698-AC (AC adapter)
- Optional power input cable, PN 300698-DC (DC cable)
Please refer to the Blue Sky Network Skylink Battery Pack User Guide for more detailed instructions and illustrations.
Add New Comment