Answer

Mar 08, 2025 - 12:50 AM
To use the BETCO B0153T22JY Clario Black Manual Foam Dispenser, please follow the instructions below:
1. Ensure that the dispenser is securely mounted on a wall or surface using the pre-drilled back plate.
2. Open the dispenser by unlocking and lifting the front cover.
3. Insert a new, factory-sealed 1000 mL foam bag into the dispenser. The bag should be placed with the nozzle facing downward.
4. Close the front cover and lock it in place.
5. Prime the dispenser by pumping the lever a few times until foam is dispensed.
6. Place your hand under the dispenser's nozzle, and press the lever down to dispense foam. The dispenser is designed for precise portion control, so only a small amount of foam will be dispensed with each press.
7. Repeat the process as needed for additional foam.
Please note that the BETCO Clario Black Manual Foam Dispenser is ADA compliant and offers a large sight glass for easy product identification and maintenance. The shot size for each dispense is 0.6 ml.
For further information or troubleshooting, please refer to the product manual provided with the dispenser.
Add New Comment