User Manual Q&AAnswer
Mar 08, 2025 - 12:37 AM
To clean the condenser coil of the NEXEL 243212 Refrigerated Deli Display Case, please follow the steps outlined in the user manual:
1. Disconnect power to the unit.
2. Take off the front grill assembly by removing all screws.
3. Remove the bolts anchoring the compressor assembly to the frame rails and carefully slide it out (tube connections are flexible).
4. Clean off accumulated dirt from the condensing coil with a stiff bristle brush.
5. Lift the cardboard cover above the fan at the plastic plugs and carefully clean the condenser coil and fan blades.
6. After brushing the condenser coil, vacuum dirt from the coil and interior floor.
7. Replace the cardboard cover, carefully slide the compressor assembly back into position, and replace the bolts.
8. Reinstall the front grill assembly onto the unit with appropriate fasteners and clips. Tighten all screws.
9. Connect the unit to power and check to see if the condenser is running.
It is important to clean the condenser coil regularly, as dirty condensers can result in compressor failure, product loss, and increased electrical costs. If you are unable to remove the debris adequately, it is recommended to call a refrigeration service company for assistance.
Please note that these instructions are a summary of the information provided in the user manual. For complete and accurate instructions, please refer to the NEXEL 243212 Refrigerated Deli Display Case User Manual.
Add New Comment