Answer

Mar 07, 2025 - 11:58 PM
To insert a microSD card into the KYOCERA GB1036 Flip Phone, follow these steps:
1. Remove the battery cover by rotating the battery cover xxxx on the back of the phone counter-clockwise using a coin. You should hear a click when the xxxx is loose.
2. Insert your fingernail into the slit at the bottom of the battery cover and lift the battery cover.
3. Lift the SIM/microSD guard tab by its edge until it stands up, then grip and gently pull the tab to flip open the guard.
4. Slide the microSD card into the slot with the gold contacts facing down. Gently push the card into place.
5. Replace the guard by gently pushing it back into place.
6. Insert the battery, making sure to align the gold contacts. Press down gently to secure the battery.
7. Replace the battery cover, ensuring all the tabs are secure and there are no gaps around the cover. Rotate the battery cover xxxx clockwise using a coin until it is tight.
Please note that microSD cards are sold separately, and it is important to press all around the edges of the battery cover to ensure the phone's waterproof seal is intact.
Add New Comment