User Manual Q&AAnswer
Mar 07, 2025 - 03:50 AM
To connect the soundstation Hyper Bass Series Professional Active Subwoofers to your mixer, you will need balanced XLR cables. Here are the steps to follow:
1. Locate the stereo balanced LINE inputs on the rear panel of the subwoofer. These are female XLR-type connectors.
2. Connect one end of the XLR cable to the LINE output of your mixer. Make sure to use a balanced output on the mixer.
3. Connect the other end of the XLR cable to one of the LINE inputs on the subwoofer. Repeat this step for the second subwoofer if you have a stereo setup.
4. If you have additional speakers or subwoofers that you want to connect to the soundstation Hyper Bass Series subwoofers, use the Link Outputs on the subwoofers. These are male XLR-type connectors. Connect the Link Outputs to the inputs of the additional speakers or subwoofers using XLR cables.
5. Make sure all connections are secure and properly tightened.
6. Once the connections are made, you can adjust the subwoofer level using the Sub Level control xxxx on the rear panel of the subwoofer.
7. Turn on the subwoofer by switching the POWER switch up. Make sure the level control is down before turning it on.
8. Adjust the volume levels on your mixer and other connected devices to achieve the desired sound.
Please refer to the soundstation Hyper Bass Series Professional Active Subwoofers User Manual for more detailed information and illustrations on the connections and controls.
Add New Comment