User Manual Q&AAnswer
Mar 07, 2025 - 03:42 AM
To install the MATTEO C65702 Baton 1-lt 3 Inch Pendant, please follow the steps below:
1. Make sure the power is completely off at the fuse box before starting the installation.
2. It is recommended to have the fixture installed by a qualified licensed electrician.
3. Prepare a clear area for the installation and wear gloves throughout the process.
4. Read the instructions carefully before starting the assembly and keep the instruction sheet for future reference.
5. Please note that all Matteo Lighting fixtures come with pre-wired modules. Avoid touching any part of the module(s) unless instructed to do so, as unnecessary contact could cause permanent damage.
Installation Steps:
1. Ensure the main power supply is switched off.
2. Fit the mounting bracket (1) onto the junction box using the machine xxxx (2).
3. Connect the wires according to color, matching white to white and black to black. Connect all earth plugs together onto the crossbar using a green xxxx to tighten (3).
4. Hold the fixture and aim the hole on the canopy (4) at the xxxx on the mounting bracket. Fit the fixture onto the bracket using the finials (5).
5. Unscrew the metal part (6) to adjust the wire length if needed.
6. Firmly install the lamp (9) into the lampholder (8).
7. Fit the product (7) onto the fixture and xxxx it up using the reading (10).
8. Once the installation is complete, reconnect the power.
If you have any further questions or need technical support, you can contact Matteo Lighting's Technical Support at 1-844-628-8368. You can also visit their website at www.matteolighting.com or reach out via email at info@matteolighting.com.
Add New Comment