User Manual Q&AAnswer
Mar 07, 2025 - 03:40 AM
To install the MATTEO C65701 Baton 1-lt 3 Inch Pendant, please follow these steps:
1. Ensure that the power is completely off at the fuse box before starting the installation.
2. It is recommended to have the fixture installed by a qualified licensed electrician for safety.
3. Prepare a clear area for the installation and wear gloves throughout the process.
4. Read the instruction manual carefully before starting the assembly.
5. Keep the instruction sheet for future reference and technical support can be reached at 1-844-628-8368.
6. Note that all Matteo Lighting fixtures come with pre-wired modules. Avoid touching any part of the module(s) unless instructed to do so, as unnecessary contact may cause permanent damage.
Installation Steps:
1. Switch off the main power supply.
2. Attach the mounting bracket (1) onto the junction box using the machine xxxx (2).
3. Connect the wires according to color (White to White, Black to Black). Connect all earth plugs together onto the crossbar using a green xxxx (3).
4. Hold the fixture and align the hole on the canopy (4) with the xxxx on the mounting bracket. Fit the fixture onto the bracket using the finials (5).
5. Unscrew the metal part (6) to adjust the wire length if needed.
6. Firmly install the lamp (9) into the lampholder (8).
7. Fit the product (7) onto the fixture and tighten it with the reading (10).
8. Reconnect the power.
For further assistance or more detailed instructions, you can visit the website www.matteolighting.com or contact their toll-free number 1-844-628-8368. You can also reach out to them via email at info@matteolighting.com.
Add New Comment