User Manual Q&AAnswer
Mar 07, 2025 - 03:39 AM
To install the MATTEO C63001 The Bougie 1-lt 6 Inch Pendant, please follow these steps:
1. Ensure that the power is completely off at the fuse box before starting the installation.
2. It is recommended to have the fixture installed by a qualified licensed electrician.
3. Prepare a clear area for the installation and wear gloves throughout the process.
4. Read the instructions carefully before starting the assembly and keep the instruction sheet for future reference.
5. Please note that all Matteo Lighting fixtures come with pre-wired modules. Avoid touching any part of the module(s) unless instructed to do so, as unnecessary contact could cause permanent damage.
6. This luminaire must be mounted or supported in a junction box.
Installation Steps:
1. Switch off the main power supply.
2. Fit the mounting bracket (1) onto the junction box using the provided machine xxxx (2).
3. Unscrew the side thread on the metal part (6) and pass the wire (7) across the part and canopy. Adjust the wire length and lock it in place.
4. Connect the wires according to color (White to White, Black to Black). Connect all earth plugs together onto the crossbar using the green xxxx to tighten (3).
5. Fit the canopy (4) onto the mounting bracket using the finials (5).
6. Firmly install the lamp (9) onto the lampholder.
7. Fix the glass shade (10) onto the metal cover using the provided xxxx (8).
8. Reconnect the power.
For further assistance or technical support, you can contact Matteo Lighting at 1-844-628-8368 or visit their website at www.matteolighting.com.
Add New Comment