User Manual Q&AAnswer
Mar 07, 2025 - 03:38 AM
To install the MATTEO C61803 Torino 14 Inch Wide Pendant, please follow the instructions below:
1. Ensure that the power is completely off at the fuse box before starting the installation.
2. It is recommended to have the fixture installed by a qualified licensed electrician.
3. Prepare the installation area, ensuring it is clear and free from any obstructions.
4. Wear gloves at all times during the installation process.
5. Read the instructions carefully before starting the assembly.
6. Keep the instruction sheet for future reference.
7. If you require technical support, you can contact Matteo Lighting at 1-844-628-8368.
Please Note:
- All Matteo Lighting fixtures come with pre-wired modules. Avoid touching any part of the module(s) unless instructed to do so, as unnecessary contact could cause permanent damage.
Installation Steps:
1. Switch off the main power supply.
2. Fit the mounting bracket (1) onto the junction box using the provided machine xxxx (2).
3. Attach the end of the chain (6) onto the metal ring and pull out the wire from the canopy (4).
4. Connect the wires (3) according to color (White to White, Black to Black). Connect all earth plugs together onto the crossbar using the green xxxx to secure them.
5. Hold the fixture and align the hole on the canopy with the xxxx on the mounting bracket. Fit the fixture onto the bracket using the finials (5).
6. Install the lamps (8) firmly into the lampholder.
7. Fit the glass shade (9) onto the fixture and secure it with the provided screws (7).
8. Reconnect the power.
For further assistance or more detailed instructions, you can visit the Matteo Lighting website at www.matteolighting.com or contact their toll-free number 1-844-628-8368.
Add New Comment