Answer

Mar 07, 2025 - 03:37 AM
To install the MATTEO C57017 Candor 7-lt 63 Inch Island Pendant, please follow the steps outlined in the instruction manual provided:
1. Ensure that the power is completely off at the fuse box before starting the installation.
2. It is recommended to have the fixture installed by a qualified licensed electrician.
3. Prepare a clear area for the installation and wear gloves throughout the process.
4. Read the instructions carefully before starting the assembly and keep the instruction sheet for future reference.
5. Please note that all Matteo Lighting fixtures come with pre-wired modules. Avoid touching any part of the module(s) unless instructed to do so, as unnecessary contact could cause permanent damage.
6. This luminaire must be mounted or supported in a junction box.
Installation Instructions:
1. Switch off the main power supply.
2. Fit the mounting bracket (1) onto the junction box using the provided machine xxxx (2).
3. Pass the wire (10) across the rods (9), metal (7), and canopy (6) in order. Secure the internal tooth washers (5) with the nut (4).
4. Connect the wires (3) according to color (White to White, Black to Black). Connect all earth plugs together onto the crossbar using the green xxxx to tighten.
5. Hold the fixture and aim the hole on the canopy at the xxxx on the mounting bracket. Fit the canopy onto the bracket using the finials (8).
6. Firmly install the lamps (11) into the lampholder.
7. Reconnect the power.
If you have any further questions or require technical support, you can contact Matteo Lighting's Technical Support at 1-844-628-8368.
Add New Comment