User Manual Q&AAnswer
Mar 07, 2025 - 03:33 AM
To install the waste drawer liner for the litter-robot LR3, follow these steps:
1. Open a new waste drawer liner and roll down the edges four times to create a rolled edge.
2. Start at the back of the waste drawer and push the rolled edge of the bag into each of the four tabs. Ensure that the bag is taut across the back and sides of the drawer.
3. Pull any slack forward toward the carbon filter.
4. It is important to make sure that the bag does not come up past the top of the sides of the waste drawer. If the bag is too high, it can trigger a false flashing blue "drawer full" light on the control panel.
5. Slide the drawer closed and press the Reset button to zero the cat sensor.
If you have any further questions or need additional assistance, you can visit whiskersupport.com for more information.
Add New Comment