How to customize parameters of Cyclone 10 GX Native Fixed Point DSP IP core using parameter editor? (intel Cyclone 10 GX Native Fixed Point DSP IP Core User Guide)

Answer

manuals.plus

Mar 07, 2025 - 03:19 AM

To customize the parameters of the Cyclone 10 GX Native Fixed Point DSP IP core, you can use the parameter editor in the Intel Quartus Prime software. Here are the steps to do so:

1. Open the Intel Quartus Prime software and select the Cyclone 10 GX Native Fixed Point DSP IP core from the IP library.
2. In the parameter editor, you will see various tabs such as Operation Mode, Multiplier Configuration, Enable 'sub' port, Input Cascade, Pre-adder, Internal Coefficient, Accumulator and Output Cascade, Pipelining, and more.
3. In each tab, you can specify the desired parameter values by selecting the appropriate options or entering the required values.
4. For example, in the Operation Mode tab, you can choose the desired operational mode (e.g., m18×18_full, m18×18_sumof2, m18×18_plus36, m18×18_systolic, m27×27).
5. Similarly, in other tabs, you can customize parameters such as representation format for operands, enable/disable certain features, specify clock sources, set bus widths, and more.
6. Make sure to refer to the Intel Cyclone 10 GX Native Fixed Point DSP IP Core User Guide for detailed information on each parameter and its possible values.
7. Once you have customized all the desired parameters, you can generate the IP core with the specified settings.

Please note that the specific parameter options and values may vary depending on the version of the Intel Quartus Prime software and the IP core version you are using. It is recommended to refer to the user guide and documentation provided by Intel for the most accurate and up-to-date information.