User Manual Q&AAnswer
Mar 07, 2025 - 02:40 AM
To mount the LAGO Display on the wall, follow these steps:
1. Remove the cleat from the box and attach it to the wall where you want the display to be mounted. Make sure the creased edge of the cleat is facing upwards and outwards. Use the included M4 L38mm screws to mount the cleat in at least 4 of the 6 horizontal slot locations, including the top 2 slots. Ensure that the display is mounted into studs or using drywall anchors for stability.
2. Remove the LAGO Display from the box using the handles on the back of the product. Mount the display onto the cleat by aligning the notches in the tops of the handles with the cleat. Avoid lifting the product from any other location to prevent damage to the display.
Add New Comment