Answer

Mar 07, 2025 - 02:39 AM
To connect the TAJFUN 1000 HAM Radio VHF-UHF amplifier to your radio, follow these steps:
1. Connect the coaxial cable from your radio's RF OUTPUT jack to the RF INPUT jack on the rear panel of the amplifier. Both jacks use N-female connectors.
2. Attach the PTT RCA (CINCH) connector from your radio to the PTT input on the amplifier. This will activate the broadcasting (Tx) mode when connected to GND.
3. Insert the supplied power cord into the POWER input on the amplifier.
4. Turn on the power switch to initialize and control the equipment.
Please refer to the instruction manual for more detailed information on connecting and operating the .
Add New Comment