User Manual Q&AAnswer
Mar 07, 2025 - 02:34 AM
To install the 3043 Sfera Line Accord Lighting fixture, please follow these steps:
1. Ensure that the electrical power is turned OFF before starting the installation.
2. The luminaire must be installed by a qualified electrician, in accordance with all applicable local codes.
3. Check that the rated luminaire voltage requirements are compatible with the available mains supply where it will be installed.
4. Remove the glass globe from the metal bracket to access the lamp holder.
5. Install a standard E-26 base light bulb (not included) into the lamp holder within the luminaire. Choose a UL Listed light bulb that does not touch the globe and does not exceed the maximum wattage rating (25W).
6. While holding each tab of the metal bracket up, put the glass globe back into place. By releasing the tabs, the globe will be attached to the holder again.
7. Plug the luminaire into a proper electrical outlet.
8. Turn ON the electrical power.
9. Your luminaire is now ready for use.
10. Use the electrical switch to turn the luminaire ON/OFF.
Please note that these instructions are a summary and it is recommended to read the complete instruction manual provided with the product for detailed installation guidelines and safety precautions.
Remember to always follow the safety instructions mentioned in the manual to avoid accidents and maintain the product warranty.
Add New Comment