User Manual Q&AAnswer
Mar 07, 2025 - 02:31 AM
To configure the BCH IP Core as an encoder or decoder, you need to set the "BCH module" parameter in the IP core's parameter editor. The "BCH module" parameter can be set to either "Encoder" or "Decoder" depending on your desired configuration.
Here are the steps to configure the BCH IP Core:
1. Open the parameter editor for the BCH IP Core.
2. Locate the "BCH module" parameter in the parameter editor.
3. Set the "BCH module" parameter to "Encoder" if you want to configure the IP Core as an encoder. Set it to "Decoder" if you want to configure it as a decoder.
4. Save the changes and generate the IP Core.
Please refer to the Intel BCH IP Core User Guide for more detailed instructions on configuring the IP Core and for additional information on its features and usage.
Add New Comment