User Manual Q&AAnswer
Mar 07, 2025 - 02:16 AM
To install the Symetrix T-5 Glass Touchscreen Controller, follow these steps:
1. xxxx the universal flush mount wall bracket into the wall-mounted back box using the appropriate screws for US or EU boxes.
2. Optional trim ring installation (not included): Holding the T-5 trim ring in place, xxxx the universal flush mount bracket into the wall-mounted back box.
3. For table mounting, attach the universal flush mount wall bracket to the optional T-5 Glass Table Mount Stand (not included) using the screws provided with the stand.
4. Connect the CAT5/6 cable to the T-5 Glass Touchscreen.
5. Attach the T-5 Glass Touchscreen onto the universal flush mount wall bracket by first hooking the snaps on the touchscreen rear panel onto the top tabs of the wall bracket. Then press the bottom of the touchscreen enclosure to snap the bottom hooks onto the tabs of the wall bracket.
6. To remove the T-5 Glass Touchscreen from the universal flush mount wall bracket, insert a pry tool (e.g. flat head screwdriver) in the bottom slot between the T-5 Glass Touchscreen and the bracket. Gently twist/rotate the tool from one side to the other to disengage the tabs on the T-5 Glass Touchscreen from the flanges on the bracket.
Please refer to the Symetrix T-5 Glass Touchscreen Controller User Guide for more detailed instructions and illustrations.
Add New Comment