User Manual Q&AAnswer
Mar 07, 2025 - 02:13 AM
To pair the ShopperPlus Cab-PC-08367 Smart Door Lock with the S+ Smart APP, follow these steps:
1. Install the lock: Before pairing the lock with the app, make sure to install the lock on your door following the provided installation instructions.
2. Download the S+ Smart APP: Scan the QR code provided in the manual or search for "S+ Smart" in the App Store or Google Play. Download and install the app on your smartphone or tablet.
3. Register an account: Open the S+ Smart APP and register an account using your email. Enter the verification code sent to your email and create a password that contains both alphabets and letters.
4. Add the lock to the app: In the S+ Smart APP, tap the "+" icon on the top right corner of the main page or select "Add Device" in the center. Choose "Lock" and then swipe right to the "Auto Scan" page.
5. Enter pairing mode: Ensure that Bluetooth on your phone is turned on and your Wi-Fi is connected. Hold the lock's Set button for 10 seconds until you hear a long beep after several short beeps. This will put the lock into "Pairing Mode".
6. Connect the lock to Wi-Fi: The lock will appear in the "Auto Scan" page of the app. Enter your Wi-Fi network password and tap "Next". The lock will start connecting to the Wi-Fi network.
7. Complete the pairing process: If the lock is successfully connected, disconnect the lock cable, remove the batteries, and proceed with the lock installation.
Note: The lock only supports a 2.4GHz Wi-Fi network.
If you encounter any issues during the pairing process or need further assistance, you can contact ShopperPlus support at 1-866-979-7463.
Add New Comment