Answer

Mar 07, 2025 - 01:38 AM
To use the Testboy 26 Cable Search Devices for finding or tracing individual wires without damaging the insulation, follow these steps:
1. Connect the cables of the transmitter (1) to the wire you are searching for.
2. Select the test sound (4) (continuous or alternating sound) and switch on (3) the transmitter (1).
3. Use the rotary switch (6) to switch on (3) the receiver (2). Adjust the volume according to the ambient conditions.
4. Press the activating button (5) and touch all possible cables with the tip (8) of the receiver.
5. The sound received will be loudest at the cable you are searching for.
Important Safety Notes:
- Only de-energized cables or lines should be connected.
- Before touching conducting cables, ensure they are de-energized.
- Identification of live conductors is not possible. Take precautions to prevent electric shock.
Please refer to the Testboy 26 Cable Search Devices Instruction Manual for more detailed instructions and safety information.
Add New Comment