How to install and replace the light source or control gear in PHILIPS MAZDA LED Wall Light? (Philips MAZDA LED Wall Light Instructions Manual)

Answer

manuals.plus

Mar 07, 2025 - 01:23 AM


To install the , follow these steps:

1. Ensure that the power supply is switched off before starting the installation process.

2. Determine the desired location for the wall light and mark the mounting holes accordingly.

3. Drill holes at the marked positions and insert the provided wall plugs.

4. Attach the mounting bracket to the wall using screws, ensuring it is securely fixed.

5. Connect the electrical wires from the wall to the corresponding terminals on the light fixture. Make sure to match the live (L), neutral (N), and earth (E) connections correctly.

6. Securely fasten the light fixture to the mounting bracket using the provided screws.

7. Once the installation is complete, switch on the power supply and test the functionality of the wall light.

To replace the light source or control gear in the PHILIPS MAZDA WL007C 6457599 LED Wall Light, it is recommended to contact the manufacturer, their service agent, or a similarly qualified person. The manual states that only these individuals should handle the replacement to ensure proper installation and avoid any potential risks or damage.

Please note that the manual also advises users to familiarize themselves with the local waste disposal, separation, and collection system for electrical and electronic products. It is important to dispose of old products in accordance with local rules to prevent negative consequences for the environment and human health.