User Manual Q&AAnswer
Mar 07, 2025 - 01:21 AM
To set up the MiBOXER 5 In 1 LED Controller Zigbee 3.0 plus 2.4G, follow these steps:
1. Set up the output mode: Press the "SET" button continuously to switch the output mode. The output mode can be confirmed based on the color of the indicator.
2. Linking Code Instructions: To link the controller with a remote control, power off the controller for 10 seconds and then power it on again or short press the "SET" button once. Within 3 seconds, short press the "|" button three times. The lights will blink three times slowly to indicate successful linking.
3. Unlinking Code Instructions: To unlink the controller from a remote control, power off the controller for 10 seconds and then power it on again or short press the "SET" button once. Within 3 seconds, short press any button five times. The lights will blink ten times quickly to indicate successful unlinking.
4. Auto Transmitting & Synchronization: The remote signal can be automatically transmitted from one light to another within a range of 30m. Multiple lights can synchronize if they are in the same dynamic mode and linked with the same remote control.
5. Dynamic Mode Table Selection: The controller offers two dynamic mode tables. To select the dynamic mode table, follow the instructions provided in the manual.
6. PWM High Frequency/Low Frequency Switching: The controller allows you to switch between high frequency (16KHz) and low frequency (250Hz) PWM. Follow the instructions provided in the manual to switch between the frequencies.
7. "Do Not Disturb" Mode: The controller has a "Do Not Disturb" mode that can be turned on or off. Follow the instructions provided in the manual to activate or deactivate this mode.
8. Smartphone App Control: The controller can be controlled using the "Tuya Smart" app. Follow the instructions provided in the manual to add the Zigbee gateway to the app and control the controller through the app.
9. Philips Hue Control: The controller can be added to the "Philips Hue" app for control. Follow the instructions provided in the manual to add the controller to the app.
10. Alexa and Google Home Voice Control: The controller can be controlled using voice commands through Amazon Alexa or Google Home. Follow the instructions provided in the manual to set up voice control.
11. DMX512 LED Transmitter Control: The controller supports DMX512 LED transmitter control for RGB+CCT output mode. Follow the instructions provided in the manual to link or unlink the controller with the transmitter.
Please refer to the manual for more detailed instructions and diagrams on how to connect the controller to LED strips and for additional information on control options and features.
Add New Comment