User Manual Q&AAnswer
Mar 07, 2025 - 01:12 AM
To install the Thermaltake GF3 ARGB 750W/850W Toughpower Tt Premium Edition power supply, please follow these steps:
1. Make sure your system is turned off and unplugged. Disconnect the AC power cord from your old power supply.
2. Disconnect all power cables from your graphics card, PS, motherboard, and other peripherals.
3. Refer to your chassis manual and uninstall your existing PSU.
4. Ensure that the power supply's AC power cable is not connected.
5. Follow the directions in your chassis manual and install the power supply using the provided screws.
6. Connect the 24-pin or 20-pin main power cable to the motherboard.
7. Connect the eight-pin +12V (EPS12V) cable to the motherboard. If your motherboard has a four-pin socket, detach the four-pin from the eight-pin cable and plug it directly into your motherboard.
8. Connect the peripheral cables, PCI-Express cables, and SATA cables. Use the SATA power connector for devices with a Serial ATA interface. Use the 6+2pin or 12+4pin PCl-E power connector for PCl-E graphic cards if required. Use the 4-pin peripheral power connector for peripheral devices if needed.
9. Connect the AC power cord to the power supply and turn it on by pushing the switch to the ON position (marked with "I").
Please note that it is essential to follow the installation steps carefully to ensure proper functionality and avoid any damage to your components. For more detailed instructions and illustrations, please refer to the user manual provided with the Thermaltake GF3 ARGB 750W/850W Toughpower Tt Premium Edition power supply.
Add New Comment