Answer

Mar 07, 2025 - 01:06 AM
To pair and connect the KROM Kayros RGB Advanced Wireless Gamepad to different devices, follow these steps:
1. Nintendo Switch™ and PC Wireless mode:
- Make sure the controller is turned off.
- Press and hold the SYNC button for 3 seconds until the LEDs flash. This puts the gamepad in pairing mode.
- On your console settings or PC Bluetooth settings, search for devices.
- The gamepad should connect automatically.
2. Android (v.10 and above) and iOS (v13.1 and above) mode:
- Make sure the controller is turned off.
- Press and hold the SYNC + X buttons together for 2 seconds until the LEDs flash quickly. This puts the gamepad in pairing mode.
- On your smartphone Bluetooth settings, search for "Xbox One Controller" devices.
- Connect to the gamepad. LEDs 1, 2, and 3 will remain lit up after a successful connection.
Note: Only games that support PS4/Xbox One controllers are compatible.
3. PC mode (X-input):
- Wireless connection:
- Make sure the controller is turned off.
- Press and hold the SYNC + Y buttons together for 2 seconds until the LEDs flash quickly.
- In your PC Bluetooth settings, search for the gamepad and pair both devices.
Note: In wireless mode, the triggers do not work as analog.
- Wired connection:
- Make sure the controller is turned off.
- Hold the R3 button and connect the controller to the PC via USB cable.
- The LED will show the assigned player and remain on after connected.
Please refer to the KROM Kayros RGB Advanced Wireless Gamepad User Manual for more detailed instructions and troubleshooting steps.
Add New Comment