User Manual Q&AAnswer
Mar 07, 2025 - 01:05 AM
The AXESS Electronics UNZ1 Un-Buffer/Splitter is designed to ensure that fuzz pedals and other impedance-sensitive effect pedals sound "right" when fed with a low impedance (Z) signal. This can be achieved by using the UNZ1 Un-Buffer/Splitter in conjunction with a buffer, wireless receiver, guitar with active pickups, or another effect pedal.
The UNZ1 Un-Buffer/Splitter essentially acts as a buffer and impedance matcher, allowing the low impedance signal to be properly matched with the impedance requirements of the fuzz pedal or other effect pedal. This helps to preserve the tone and characteristics of the effect pedal, ensuring it performs optimally.
To use the UNZ1 Un-Buffer/Splitter with fuzz pedals or other impedance-sensitive effect pedals, simply connect the low impedance signal source (such as a buffer or wireless receiver) to the input of the UNZ1. Then, connect the output of the UNZ1 to the input of the fuzz pedal or effect pedal. Make sure to follow the correct signal flow and use appropriate cables.
It's important to note that the UNZ1 Un-Buffer/Splitter is not affiliated with or endorsed by Line 6® or Yamaha Guitar Group, Inc. It is a separate product developed by AXSGTRTM and/or Axess Electronics TM.
For more detailed instructions and information, please refer to the AXESS Electronics UNZ1 Un-Buffer/Splitter User Manual.
Add New Comment