User Manual Q&AAnswer
Mar 07, 2025 - 01:03 AM
To connect the AXESS Electronics OTS1-FUZZ-01 OTS1 Patch Box with the AXSGTR UNZ1 Un-Buffer and other effect pedals, follow these steps:
1. Ensure that the AXSGTR UNZ1 Un-Buffer is connected correctly according to its user manual. The UNZ1 Un-Buffer is not shown in the OTS1-FUZZ-01 manual but can be purchased separately.
2. Connect your guitar or low Z signal source to the input jack of the AXSGTR UNZ1 Un-Buffer.
3. Connect the output jack of the AXSGTR UNZ1 Un-Buffer to the input jack of the OTS1-FUZZ-01 Patch Box.
4. Connect the output jack of the OTS1-FUZZ-01 Patch Box to the input jack of your amplifier or other effect pedals.
5. Ensure that all other effect pedals are connected in front of the OTS1-FUZZ-01 Patch Box, including the pre-buffer fuzz pedal and TRS footswitch.
By following these steps, you will be able to properly connect the AXESS Electronics OTS1-FUZZ-01 OTS1 Patch Box with the AXSGTR UNZ1 Un-Buffer and other effect pedals, allowing your fuzz pedal and impedance-sensitive effect pedals to sound "right" when fed with a low Z signal. For more information and a visual diagram, refer to the OTS1-UNZ1-01 diagram on the AXESS Electronics website.
Add New Comment