User Manual Q&AAnswer
Mar 07, 2025 - 12:46 AM
To install the HINKLEY 51090 16w Integrated LED Bath Bar, follow these steps:
1. Find a clear area in which you can work and unpack the fixture and glass from the carton.
2. Carefully review the instructions prior to assembly.
3. To install the glass (G), unscrew the xxxx (K) on the side of the fixture.
4. Remove the xxxx (S) that holds the L arm (L) to the fixture.
5. Take off the L arm (L) from the fixture.
6. Remove the spacer (B) and glass cap (C) from the fixture.
7. Slide the glass (G) onto the fixture.
8. Replace the spacer (B) and glass cap (C).
9. Put back the L arm (L), xxxx (S), and xxxx (K) to lock the glass into place.
10. Release the mounting plate (A) from the fixture by unscrewing the four-barrel knobs (Z) on the front of the fixture. Keep the screws (V) attached to the mounting plate.
11. Secure the mounting plate (A) to the junction box using two 8-32 screws (F) (not provided).
12. Complete the wiring connections using IS-18 instructions (make sure the power is off before completing any wiring).
13. Replace the four-barrel knobs (Z) to complete the fixture mounting.
14. The fixture can now be powered on.
Please note that for safety reasons, it is important to read the wiring and grounding instructions (I.S. 18) and any additional directions provided. Turn off the power supply during installation. If new wiring is required, consult a qualified electrician or local authorities for code requirements.
For more detailed instructions and diagrams, please refer to the instruction manual provided with the product.
Add New Comment