User Manual Q&AAnswer
Mar 07, 2025 - 12:40 AM
To set up the Bestway LAY-Z-SPA AirJet Round Hot Tub, follow these steps:
1. Choose a suitable location: The surface should be flat, smooth, and capable of supporting the weight of the spa and users. It should also be at least 4 meters away from any power source and free from overhead power lines or trees.
2. Inflate the spa: Use the provided pump to inflate the spa liner. Make sure not to cover the holes on the base of the inflation hose and do not use an air compressor.
3. Connect the pump: Attach the pump to the spa liner using the adapters provided. Make sure the adapters are level with the spa adapters.
4. Fill the spa with water: Use a hose to fill the spa with water. The water temperature should not exceed 40°C (104°F).
5. Connect the power: Plug the pump into a grounded mains supply socket. Make sure the power source is earthed and the spa is connected to a grounded socket.
6. Set up the control panel: The control panel allows you to adjust the temperature, activate the massage system, and control other functions. Follow the instructions in the owner's manual to set up and use the control panel.
7. Maintain water chemistry: Use pool chemicals to maintain water chemistry and chlorine or bromine tablets with the chemical dispenser. Test the water regularly and adjust the chemical levels as needed.
8. Use and enjoy: Once the spa is set up and the water is at the desired temperature, you can start using and enjoying your Bestway LAY-Z-SPA AirJet Round Hot Tub.
Please refer to the owner's manual for detailed instructions and safety guidelines.
Add New Comment