Answer

Mar 07, 2025 - 12:37 AM
To install the Steinel IS 180 digi Motion Detector Outdoor white, follow these steps:
1. Check all components for damage and do not use the product if it is damaged.
2. Select an appropriate site for installation, considering reach and motion detection.
3. Ensure the power supply is switched OFF.
4. Unscrew the retaining xxxx and detach the sensor switch from the wall mount.
5. Mark the drill holes and drill holes with a diameter of 6 mm. Fit wall plugs and firmly xxxx the wall mount into place.
6. Connect the mains power supply lead according to the terminal labeling. An additional external load can be connected to N and L.
7. Fit the sensor switch on the wall mount and tighten the retaining xxxx .
8. Switch ON the power supply.
9. Make settings for the desired function using the Steinel Connect app.
Please refer to the instruction manual for more detailed instructions and illustrations on the installation process.
Add New Comment