How do I connect the LG PREMTBB10 Standard III Black Wired Remote Controller to my indoor unit? (LG PREMTBB10 Standard III Black Wired Remote Controller User Guide)

Answer

manuals.plus

Mar 07, 2025 - 12:34 AM


To connect the LG PREMTBB10 Standard III Black Wired Remote Controller to your indoor unit, follow these steps:

1. Ensure that the power supply to the remote controller is connected to a 12VDC power source from the indoor unit.

2. Use the provided LG Communications cable to establish communication between the remote controller and the indoor unit. The cable has three conductors: red (12V), yellow (signal), and black (GND).

3. Connect the red conductor of the cable to the 12VDC power terminal of the indoor unit.

4. Connect the yellow conductor of the cable to the signal terminal of the indoor unit.

5. Connect the black conductor of the cable to the GND terminal of the indoor unit.

6. Make sure the cable is securely connected to both the remote controller and the indoor unit.

7. If you need to extend the communication cable, you can use field-supplied wire or the Wired Remote Group Control Cable Assembly (PZCWRCG3) or Wired Remote Extension Cable (PZWRC1). The maximum extension length is 164 feet, and you can use up to four extension cables.

Please note that it is important to follow the installation instructions provided in the applicable LG installation manual for proper installation and operation of the remote controller.

For further assistance or specific installation details, refer to the LG PREMTBB10 Standard III Black Wired Remote Controller User Guide or consult the LG customer support.