User Manual Q&AAnswer
Mar 07, 2025 - 12:28 AM
To install the FISHER PAYKEL AHS-OBOD-76S Contemporary Round Handle Kit on your wall oven or integrated warmer drawer, please follow these steps:
1. Ensure that the power to the appliance is turned off before starting the installation process.
2. Locate the pre-drilled holes on the front of your wall oven or integrated warmer drawer. These holes are specifically designed for handle installation.
3. Align the holes on the handle with the pre-drilled holes on the appliance.
4. Insert the provided screws through the handle and into the pre-drilled holes. Use a screwdriver to tighten the screws securely.
5. Once the handle is securely attached, double-check that it is aligned properly and level.
6. Turn on the power to the appliance and test the handle to ensure it is functioning correctly.
Please note that these instructions are a general guide and may vary slightly depending on your specific model. It is always recommended to consult the user manual provided with your appliance for detailed and model-specific installation instructions.
If you encounter any difficulties during the installation process or have any further questions, we recommend contacting Fisher & Paykel's Customer Care Centre at 1.888.936.7872 or visiting their website at www.fisherpaykel.com for additional support and assistance.
Add New Comment