User Manual Q&AAnswer
Mar 07, 2025 - 12:23 AM
To install the FISHER PAYKEL AHP3RD36S Professional Round Flush Handle Kit for Integrated Cooldrawer, please follow the steps below:
1. Ensure that you have all the necessary tools and equipment for installation, including a screwdriver and measuring tape.
2. Measure and mark the desired height for the handle on the Cooldrawer door panel or cabinetry panel. The height should be between 1 and 1 7/16 inches.
3. Measure and mark the center point of the door panel's width. This will be the starting point for the handle installation.
4. Align the handle with the center point and desired height markings. Make sure it is level and centered.
5. Using a screwdriver, attach the handle to the door panel using the provided screws. Ensure that the screws are tightened securely.
6. Repeat the process for the other side of the door panel if you are installing a pair of handles.
7. Once the handles are securely attached, test their functionality by opening and closing the Cooldrawer.
Please note that these instructions are a general guide, and it is always recommended to refer to the specific user guide or installation manual provided by Fisher & Paykel for your model. If you have any further questions or need assistance, you can contact Fisher & Paykel's Customer Care Centre at 1.888.936.7872 or visit their website at www.fisherpaykel.com for additional support.
Add New Comment