User Manual Q&AAnswer
Mar 06, 2025 - 11:44 PM
To program the RFSAI Series Switch Unit with Input for External Button, follow these steps:
1. Press and hold the programming button on the receiver (RFSAI-62B-SL) for 3-5 seconds. For RFSAI-61B-SL, press and hold the programming button for more than 1 second. The LED on the receiver will start flashing at 1-second intervals, indicating that it is in programming mode.
2. Select and press one button on the wireless switch that you want to assign a function to. This button will control the output of the switch unit. Make sure there is a 1-second delay between each press.
3. To finish programming mode, press the programming button on the receiver for less than 1 second. The LED will light up according to the pre-set memory function.
Note: The RFSAI-11B-SL has a fixed function and does not require programming.
For more detailed instructions and information on other functions and programming options, please refer to the instruction manual provided with the RFSAI Series Switch Unit.
Add New Comment