User Manual Q&AAnswer
Mar 06, 2025 - 11:11 PM
To check the oil level in the Metabo Mega 400-50 W Air Compressor, follow these steps:
1. Locate the oil inspection glass (number 11 on the diagram).
2. Unscrew the oil sealing plug (number 10 on the diagram).
3. Check the oil level in the inspection glass. The oil level should be between the two markings.
4. If the oil level is low, fill the oil until it reaches the middle of the inspection glass.
5. xxxx back in the oil sealing plug.
It is important to use the correct type of oil for the compressor. The recommended oil is approximately 0.9 liters of SAE 40 (SAE 20) oil. Refer to the technical data section of the instruction manual for more information on the oil requirements for your specific model.
Note: It is always recommended to refer to the instruction manual for detailed instructions and safety precautions before performing any maintenance tasks on the air compressor.
Add New Comment