How do I properly assemble the BLACK WIDOW AMC-600-2-PRO Aluminum Double Motorcycle Carrier? (BLACK WIDOW AMC-600-2-PRO Motorcycle Carrier Instruction Manual)

Answer

manuals.plus

Mar 06, 2025 - 10:53 PM


To assemble the BLACK WIDOW AMC-600-2-PRO Aluminum Double Motorcycle Carrier, please follow the steps outlined in the instruction manual:



Step 1: Install the support brackets (A) onto the hitch bar (B) on the outside of the welded brackets using eight M8x20 bolts (H). Leave the bolts hand tight.



Step 2: Place the motorcycle rack (C) between the support brackets and install four M8x40 bolts (G), washers (I), and nuts (J). Securely tighten all twelve support bracket bolts. Repeat Steps 1 and 2 for the second motorcycle rack platform, ensuring it is rotated 180° from the first platform.



Step 3: Slide the anti-tilt bracket (F) over the hitch bar with the flat side of the bracket towards the vehicle. Slide the rack into the trailer hitch, install the hitch pin (M), then tighten the four anti-tilt bolts evenly. These bolts will pinch the bracket on the collar on the hitch, preventing excessive movement of the rack.



Step 4: The ramp (D) can be stored on either side of the motorcycle rack using the supplied wing nut, bolt, and nut assemblies (E).



Step 5: If desired, the optional 8-1/2" small wheel adapter bolt (K) can be inserted into the front of the motorcycle rack to make the front wheel gap smaller.



Step 6: Secure each motorcycle to the rack using tie-down straps (sold separately). Use two ratchet straps attached to the handlebars, two straps attached to the rear frame of the bike, and two wheel ties.



Please ensure that you review the complete instruction manual for additional safety guidelines and information before using the motorcycle carrier.