User Manual Q&AAnswer
Mar 06, 2025 - 10:48 PM
To install the LIGHTOLIER IHB Series Decorative High Bay LED High Bay Light, you have two options: Hook Mount and Ceiling Mount. Here are the installation steps for each method:
Hook Mount:
1. xxxx the hook into the fixture and tighten it (Figure 1).
2. Hang the fixture on the ceiling hook or chain (Figure 2).
3. After installation, connect the wire of the fixture to the mains according to local wiring rules, ensuring a stable connection and providing good protection on the connection.
Ceiling Mount:
1. Mark the mounting surface with a mark pen or sharp tool and drill holes (Figure 3).
2. Fix screws into the holes using a hammer (Figure 4).
3. Align the bracket hole with the xxxx hole (Figure 5) and push the fixture to one side (Figure 6) to fix it.
4. After installation, connect the wire of the fixture to the mains according to local wiring rules, ensuring a stable connection and providing good protection on the bracket screws.
(Note: The bracket is not included in the box.)
Please refer to the provided figures in the instruction manual for visual guidance on the installation steps.
It is important to note that before installation, you should turn off the power, wear gloves to avoid injury, and ensure proper earth grounding for safety. Additionally, please abide by related country, regional, and local laws and regulations when installing this fixture.
For any specific questions or concerns regarding the installation process, it is recommended to consult the LIGHTOLIER IHB Series Decorative High Bay LED High Bay Light Instruction Manual or contact the manufacturer directly for further assistance.
Add New Comment