User Manual Q&AAnswer
Mar 06, 2025 - 10:44 PM
To install the sygonix 2612644 LED Strips Complete Set with USB-Connection, follow these steps:
1. Select a smooth and flat surface for installation. Ensure that the surface is dry and free of any dirt, grease, or other contaminants.
2. Clean the surface thoroughly and let it dry completely. This is important to ensure that the adhesive tape on the back of the LED strip sticks properly.
3. Peel off the film from the adhesive tape located on the back side of the LED strip.
4. Gently press the LED strip against the surface, making sure it is securely attached.
5. Connect all the components following the sequence shown in the provided drawing. Make sure to align the arrow on the connection cable with the +5V marking on the LED strip. This ensures that the strips will illuminate correctly.
Please note that the LED strip should not be fastened to movable objects, exposed to mechanical stress, or stepped on, as this may damage it. Avoid using wires or sharp/pointed mounting materials. Do not perforate the strip with nails or similar items.
For more detailed instructions and safety information, please refer to the sygonix 2612644 LED Strips Complete Set with USB-Connection instruction manual.
Add New Comment