User Manual Q&AAnswer
Mar 06, 2025 - 10:43 PM
To install the STAHL 210733 miniCLIX Plug Connector Coupling, please follow these steps:
1. Ensure that the power supply is turned off before starting the installation process.
2. Identify the cable that needs to be connected to the plug connector coupling.
3. Strip the insulation from the cable to expose the conductors.
4. If using a crimp terminal, insert the stripped conductors into the appropriate crimp terminal and use a crimping tool to secure the connection. If using a spring clamp terminal, insert the stripped conductors into the appropriate terminal and ensure they are securely held in place.
5. Insert the cable with the connected terminal into the miniCLIX plug connector coupling.
6. Ensure that the cable is properly aligned with the coupling and push it in until it is fully inserted.
7. If necessary, use the recommended strain relief accessory (part number 154585) to secure the cable and provide additional protection.
8. Once the cable is securely connected, you can turn on the power supply.
Please note that this is a general guide for installing the miniCLIX plug connector coupling. For specific instructions and safety precautions, it is recommended to refer to the product manual provided by R. STAHL Schaltgeräte GmbH.
Add New Comment