User Manual Q&AAnswer
Mar 06, 2025 - 10:41 PM
To customize the front panel and handle of the FISHER and PAYKEL DD60SI9 Integrated Single DishDrawer Dishwasher, you can follow these steps:
1. Measure the dimensions of your kitchen cabinetry front panel and handle to ensure a proper fit.
2. Remove the existing front panel and handle from the dishwasher by following the instructions in the user guide.
3. Attach your custom front panel to the dishwasher by aligning it with the provided mounting brackets and securing it in place.
4. Install your custom handle onto the dishwasher by following the instructions in the user guide.
5. Ensure that the front panel and handle are securely attached and aligned with the dishwasher.
6. Test the functionality of the dishwasher to ensure that the customized front panel and handle do not interfere with its operation.
Please note that the user guide for the FISHER and PAYKEL DD60SI9 Integrated Single DishDrawer Dishwasher may provide specific instructions and illustrations for customizing the front panel and handle. It is recommended to refer to the user guide for detailed and accurate instructions.
Add New Comment