User Manual Q&AAnswer
Mar 06, 2025 - 10:40 PM
To install the Joie i-Jemini Baby Car Seat without using the i-Base Encore, please follow the steps below:
1. Ensure that your vehicle seat is suitable for installation. Refer to your vehicle's manual for information on suitable seating positions and any specific requirements.
2. Place the car seat in the desired seating position in your vehicle. Make sure the car seat is facing the correct direction according to your child's age and weight.
3. Locate the seat belt path on the car seat. This is usually indicated by arrows or labels on the seat itself.
4. Thread the vehicle seat belt through the seat belt path. Make sure the seat belt is not twisted and is securely fastened.
5. Adjust the length of the seat belt as necessary to ensure a snug fit. Pull the seat belt tight to remove any slack.
6. Lock the seat belt in place according to your vehicle's instructions. This may involve using a locking clip or engaging the vehicle's locking mechanism.
7. Check the installation for any movement or looseness. The car seat should be securely installed and should not move more than an inch in any direction.
8. Adjust the recline angle of the car seat if necessary. Follow the instructions in the user guide to ensure the correct recline position for your child's age and weight.
9. Double-check that the car seat is securely installed and that all seat belts are properly fastened.
Always refer to the Joie i-Jemini Baby Car Seat user guide for specific instructions and guidelines. If you have any further questions or concerns, it is recommended to contact Joie customer support through their website at www.joiebaby.com/contact
Add New Comment