User Manual Q&AAnswer
Mar 06, 2025 - 10:28 PM
To install and connect the STAHL 210728 miniCLIX Plug Connector Coupling, please follow the instructions below:
1. Ensure that the power supply is turned off before starting the installation process.
2. Determine the appropriate location for the coupling based on your specific application requirements.
3. Prepare the cable by stripping the insulation from the end to expose the conductors.
4. Choose the appropriate connection type based on your cable size. The manual mentions a 1.5 mm² crimp connection, but other options may be available.
5. Connect the cable to the coupling using the chosen connection type. If using a crimp connection, use a crimping tool suitable for the specified cable size.
6. Ensure that the cable is securely connected to the coupling and that there is proper strain relief to prevent cable damage.
7. If necessary, use an anti-twist protection accessory to prevent the coupling from rotating or twisting.
8. Once the cable is properly connected, you can mount the coupling in the desired location. Follow the dimensional drawings provided in the manual for reference.
9. Check that all components are properly fitted and secured, including any protective caps or gaskets.
10. Verify that the coupling is rated for the voltage and current requirements of your application. The manual states a rated voltage of up to 400 V AC and a rated current of up to 16 A.
11. Finally, ensure that the coupling is properly sealed to achieve the specified degree of protection (IP66) and, if needed, IP68 when the protective caps are closed and secured.
Please note that the above instructions are a general guideline. It is essential to refer to the specific instructions and guidelines provided in the STAHL 210728 miniCLIX Plug Connector Coupling Owner's Manual for accurate and detailed installation steps.
Add New Comment