How do I install the STAHL 169186 miniCLIX Plug Connector Plug? (STAHL 169186 miniCLIX Plug Connector Plug Owner's Manual)

Answer

manuals.plus

Mar 06, 2025 - 10:16 PM

To install the STAHL 169186 miniCLIX Plug Connector Plug, please follow the steps below:

1. Ensure that the power supply is disconnected before starting the installation process.

2. Identify the appropriate location for the plug connector. It is suitable for harsh industry environments and can be used in Zones 1, 2, 21, and 22.

3. Make sure the ambient temperature is within the specified range (-55 °C to +40 °C for plastic version, -55 °C to +75 °C for metal version).

4. Determine the clamping range required for your application. The miniCLIX plug connector has a clamping range of 4 to 7.5 mm.

5. Choose the appropriate connection type. The miniCLIX plug connector uses a 1.5 mm² crimp connection.

6. If necessary, use the recommended color ring coding for identification. The recommended color for coding is grey, and the coding should be set at the 8 o'clock position.

7. Connect the cables to the plug connector using the crimp or spring clamp terminal. Use a crimping tool for crimp connection versions up to 4 mm².

8. Once the cables are properly connected, ensure that the protective caps are closed and secured, and all components are properly fitted and secured.

9. Verify the degree of protection required for your application. The miniCLIX plug connector has an IP66 degree of protection. With the protective caps closed and secured, it can achieve IP68 protection (2 m water column, 1 hour) according to IEC/EN 60529.

10. Finally, double-check all connections and ensure that everything is securely in place.

Please note that the above instructions are a general guide. For more detailed installation instructions and specific information about your application, refer to the STAHL 169186 miniCLIX Plug Connector Plug Owner's Manual provided with the product.