How do I install and connect the STAHL 210749 miniCLIX Plug Connector Flange Socket? (STAHL 210749 miniCLIX Plug Connector Flange Socket Owner's Manual)

Answer

manuals.plus

Mar 06, 2025 - 10:12 PM

To install and connect the STAHL 210749 miniCLIX Plug Connector Flange Socket, please follow these steps:

1. Ensure that the installation area is in Zone 1 and suitable for harsh industry environments.
2. Make sure the device is suitable for your application by checking the rated voltage (up to 400 V AC) and rated current (up to 16 A).
3. Determine the type of material you need for the plug connector. It is available in polyamide, nickel-plated brass, or stainless steel.
4. Choose the appropriate cable entry size (M25) for your application.
5. Prepare the cable by crimping or using a spring clamp terminal.
6. Connect the cable to the flange socket using the appropriate connection type (1.5 mm² conductor 30 cm).
7. Ensure that the locking device is present and properly secured.
8. If needed, use the recommended anti-twist protection for the flange socket or device plug.
9. Verify the recommended color ring coding (red) for easy identification.
10. Check the IP rating (IP66) for protection against dust and water. Note that with protective caps closed and secured, it can achieve IP68 (2 m water column, 1 hour) according to IEC/EN 60529.
11. If required, use the provided crimping tool for all crimp connection versions up to 4 mm².
12. Finally, refer to the dimensional drawings in the manual for any specific installation details.

Please note that this answer is based on the information provided in the owner's manual for the STAHL 210749 miniCLIX Plug Connector Flange Socket. For further assistance or clarification, it is recommended to consult the manual or contact the manufacturer directly.