How do I install the SUNCO LIGHTING 09 LED Emergency Pack? (SUNCO LIGHTING 09 LED Emergency Pack Instruction Manual)

Answer

manuals.plus

Mar 06, 2025 - 10:10 PM

To install the SUNCO LIGHTING 09 LED Emergency Pack, please follow the instructions provided in the manual. Here is a step-by-step guide:

1. Before installation, it is important to turn off the electrical power at the fuse or circuit breaker box.

2. Ensure that you have a qualified licensed electrician for the installation. If you are unsure about the installation or maintenance, consult a professional electrician and check your local electrical code.

3. Make sure the power supply voltage matches the information on the luminaire label.

4. All electrical and grounded connections should be made in accordance with the National Electrical Code and any applicable local code requirements.

5. Use UL approved wire connectors to cap all wiring connections.

6. The device requires an un-switched AC power source of 120V AC to 277V AC.

7. The SUNCO LIGHTING 09 LED Emergency Pack is designed for use in fixtures listed for dry and damp locations.

8. Avoid letting power supply cords touch hot surfaces and do not mount the emergency pack near gas or electric heaters.

9. The battery used in the emergency pack is rechargeable LiFePO4 type and must be recycled or disposed of properly.

10. Only use the emergency driver with accessory equipment recommended by the manufacturer. Servicing should only be performed by qualified service personnel.

11. The emergency driver should be used only for its intended purpose and should be mounted in locations and at heights where it will not be easily tampered with by unauthorized personnel.

Please refer to the manual for the wiring diagram and specific instructions on adjusting the output current of the emergency pack to match the fixture's driver. It is important not to exceed the current provided by the fixture's main driver to avoid damaging the LEDs and voiding the warranty.

Note: The information provided here is a summary of the instructions from the manual. For complete and accurate instructions, please refer to the SUNCO LIGHTING 09 LED Emergency Pack Instruction Manual.