How do I install the Rhino RA4PR-FL KammBar Fleet System on my vehicle? (RHINO RA4PR-FL KammBar Fleet system Instruction Guide)

Answer

manuals.plus

Mar 06, 2025 - 10:08 PM

To install the Rhino RA4PR-FL KammBar Fleet System on your vehicle, please follow the instructions provided in the fitting kit. Here is a step-by-step guide:

1. Start by ensuring that your vehicle is clean and free from any dirt or debris.

2. Locate the fitting kit that comes with the Rhino RA4PR-FL KammBar Fleet System. This kit should include all the necessary components for installation.

3. Carefully read the installation instructions provided in the fitting kit. Familiarize yourself with the different parts and their functions.

4. Begin by positioning the KammBar on the roof of your vehicle. Make sure it is centered and aligned properly.

5. Use the included brackets and fixings to secure the KammBar to the roof. Follow the specific instructions provided in the fitting kit for your vehicle model.

6. Tighten the fixings securely, ensuring that the KammBar is firmly attached to the roof.

7. Once the KammBar is securely installed, you can now attach any additional accessories or load-carrying systems, such as roof racks or ladder clamps, as needed. Refer to the fitting kit instructions for the specific installation process of these accessories.

8. After attaching any additional accessories, double-check all fixings and connections to ensure they are tight and secure.

9. Finally, test the stability of the installed KammBar and accessories by gently shaking or applying light pressure. If everything is properly installed, they should be stable and not move or rattle.

Please note that these instructions are a general guide, and it is important to refer to the specific fitting kit instructions provided with your Rhino RA4PR-FL KammBar Fleet System for accurate installation steps tailored to your vehicle model.