How do I install the Rhino QA4PR-FL KammBar Fleet System? (RHINO QA4PR-FL KammBar Fleet system Instruction Guide)

Answer

manuals.plus

Mar 06, 2025 - 10:07 PM

To install the Rhino QA4PR-FL KammBar Fleet System, please follow the instructions provided in the manual. Here is a step-by-step guide:

1. Start by ensuring that you have all the necessary components for installation, including the KammBar Pro, KammBar Fleet, and the Fitting Kit.

2. Carefully read through the installation instructions provided in the manual to familiarize yourself with the process.

3. Begin by positioning the KammBar Fleet onto the roof of your vehicle. Make sure it is centered and aligned properly.

4. Use the Fitting Kit to secure the KammBar Fleet to the roof. Follow the specific instructions provided in the manual for your vehicle model, as the fitting process may vary.

5. Once the KammBar Fleet is securely attached, proceed to install the KammBar Pro onto the Fleet. Again, refer to the manual for detailed instructions on how to properly attach the KammBar Pro.

6. After the KammBar Pro is installed, make sure it is securely fastened and aligned correctly.

7. Double-check all the fittings and connections to ensure they are tight and secure.

8. Finally, test the stability and functionality of the Rhino QA4PR-FL KammBar Fleet System before using it for any load-carrying purposes.

If you encounter any difficulties during the installation process or have any specific questions, it is recommended to contact Rhino Products Ltd directly. They can provide further assistance and guidance based on your specific vehicle and setup. You can reach them at the contact details provided in the manual: UK +44 (0) 151 319 2931 or via email at sales@rhinoproducts.co.uk.