User Manual Q&AAnswer
Mar 06, 2025 - 10:06 PM
To install the Rhino P2PR-FL KammBar Fleet System on your vehicle, please follow the step-by-step instructions provided in the installation manual. Here is a general overview of the installation process:
1. Ensure that you have received all the necessary parts and tools included with the product. Refer to the parts list in the manual to confirm.
2. Start by positioning the KammBar base plates on the roof of your vehicle. The number of base plates required will depend on the length of the KammBar system you have purchased. Align the base plates with the roof's mounting points or, if necessary, use the provided drilling template to mark the correct positions.
3. Once the base plates are positioned correctly, use the appropriate tools (usually a wrench or socket set) to secure them to the roof. Follow the torque specifications provided in the manual to ensure proper tightening.
4. Attach the KammBar crossbars to the base plates. Slide the crossbars into the channels on the base plates and secure them using the provided bolts and washers. Again, refer to the manual for the recommended torque specifications.
5. After the crossbars are securely attached, check their alignment and adjust if necessary. The KammBar system should be level and centered on your vehicle's roof.
6. Finally, double-check all the fastenings and ensure that everything is securely tightened. It is recommended to periodically inspect the system for any signs of loosening or damage during regular use.
Please note that these instructions are a general overview, and it is essential to refer to the specific installation manual provided with your Rhino P2PR-FL KammBar Fleet System for detailed and accurate instructions. If you encounter any difficulties during the installation process, it is recommended to consult a professional or contact Rhino Products Ltd for further assistance.
Add New Comment