User Manual Q&AAnswer
Mar 06, 2025 - 10:06 PM
To assemble the LECO 47 20410 103 Hanging Parasol, please follow these steps:
1. Place the parasol on firm ground with a suitable stand. Only use the included parasol stand. Do not use the parasol without a stand.
2. Ensure that the kit is complete and accurate based on the spare part list before assembly. Notify the manufacturer of any defects or missing parts before assembling the product.
3. Add 4 pieces of concrete slabs, stone slabs, fillable plastic sheets, etc., with dimensions of approximately 40 x 40 x 4/5 cm, 45 x 45 x 4/5 cm, 50 x 50 x 5 cm, etc., to the umbrella base. The minimum stand weight of the cross base should be approximately 50 kg. Without proper weighting, the use of the parasol is prohibited.
4. Fasten the parasol in the umbrella base and tighten the screws firmly. Regularly check the screws for tightness.
5. To open the parasol, turn the crank clockwise. To close the parasol, turn the crank counter clockwise. Be careful not to grasp between the parts of the frame or the grab pole of the sunshade to avoid the risk of injury by crushing.
6. The parasol can be rotated 360 degrees. Use the locking lever to secure the desired position.
7. Clean the parasol with a damp cloth and keep it protected when not in use. Do not hang anything on the parasol.
8. Close the parasol during strong wind and hard rain. Do not use the parasol near grills, barbecues, fires, etc.
Please refer to the instruction manual for more detailed information and safety precautions.
Add New Comment