User Manual Q&AAnswer
Mar 06, 2025 - 09:59 PM
To install the SUNCO LIGHTING 89845 LED Bi-Level and Daylight Harvest sensor in your luminaire, please follow these steps:
1. Before installation, ensure that you have read the instruction manual thoroughly and have all the necessary parts.
2. It is important to note that the installation of the sensor requires knowledge of the luminaire's electrical systems. If you are not qualified, it is recommended to contact a qualified electrician for installation.
3. Disconnect power or turn off the circuit breaker before starting the installation process to prevent the risk of electric shock.
4. Remove the trim from the box and ensure that no parts are missing.
5. Make sure to follow all local and national electrical code (N.E.C.) standards when making electrical connections.
6. Do not expose the wiring to edges of sheet metal or other sharp objects to prevent wiring damage or abrasion.
7. If you are unsure about any part of the installation process, it is recommended to consult a qualified electrician for assistance.
Please refer to the instruction manual for further details and diagrams on the wiring connections and parameter settings using the DIP switch.
Note: The factory default settings for the sensor are as follows: Sensitivity set to 100%, hold on time 10 seconds, daylight sensor at 30 Lux, dimming level at 30%, and dimming time at 60 minutes.
Add New Comment