How do I install the SUNCO LIGHTING 89845 Bi-Level and Daylight Harvest Microwave Sensor? (SUNCO LIGHTING 89845 Bi-Level Microwave Sensor User Guide)

Answer

manuals.plus

Mar 06, 2025 - 09:57 PM


To install the , follow these steps:

1. Choose a suitable mounting location: The sensor can be mounted on the ceiling or wall. Ensure that the location provides a clear view of the area you want to monitor.

2. Turn off the power: Before starting the installation, turn off the power to the circuit where you will be connecting the sensor.

3. Mount the sensor: Use the included screws to mount the sensor to the desired location. If needed, you can use the optional extender mount (49845) for additional flexibility.

4. Connect the wiring: Connect the sensor to the power supply and the lighting fixture according to the wiring diagram provided in the installation instructions. Make sure to follow proper electrical safety procedures.

5. Adjust settings: Once the sensor is installed and powered on, you can adjust various settings such as light levels, stand-by time, time delay, and detection sensitivity. Refer to the user guide for detailed instructions on adjusting these settings.

6. Test the sensor: After installation and configuration, test the sensor by moving within its detection range and observing if the connected lights respond accordingly. Make any necessary adjustments to the settings if needed.

Please note that this answer provides a general overview of the installation process. For specific and detailed instructions, it is recommended to refer to the Install Instructions document provided by the manufacturer.